|
.circuit.construction...
I have worked out the following circuit diagram by examining my BluesHawk - I think it is right - but take care if you use it as a basis for modifying the circuit of your BluesHawk - particularly the Varitone circuit.
I have now obtained the official schematic from Gibson - I have made some minor corrections to my diagram...
| The multi-capacitor/resistor package - contains the equivalent of five capacitors and six resistors. Varitone position 2 is routed via a .001uF cap, pos. 3 via a .003uF cap, pos. 4 via a .01uF cap, pos. 5 via a .03uF cap and pos. 6 via a .22uF cap. Series resistors are included to balance the circuit - the first switch position bypasses the varitone. |  |
the multi-R-C package soldered to the varitone switch |
